M-6379-B

These Ford Racing roller pilot bearings are direct replacements

KRC Racing 7300B Black 2 Lever 3 Speed Shifter Kit with rods, shifter arm, heims and mounting plate.

KRC Racing 7300R Red 2 Lever 3 Speed Shifter Kit with rods, shifter arm, heims and mounting plate.

KRC Racing 7400B Black Bert 2 Lever Shifter

KRC Racing 7400R Red Bert 2 Lever Shifter

KRC Racing 7401B Brinn 2 Lever Shifter

MOR-41100

Quarter Master : 275090

Late Chevy Balanced (Externally Balanced, One-Piece Rear Main Seal) - Button Flywheel for V-Drive & Pro-Series 5.5" Clutch Unit

508507 Replacement Clutch floater plate for Quarter Master Optimum V 7.25" Clutch

Early Chevy, Two-Piece Rear Main Seal, Neutral Balance 153 Tooth Flexplate*

Late Chevy, One-Piece Rear Main Seal, Neutral Balance - Lightweight - 153 Tooth Flexplate*

Early Chevy, Two-Piece Rear Main Seal, Neutral Balance - Ultra-Lightweight - 153 Tooth Flexplate*

Ford, Neutral Balance - Lightweight - 157 Tooth Flexplate*

76-Series master cylinders retain the rear port to continue to match the function of the old version, while the added extra-deep top port enables the use of a banjo fitting.

Designed for use with Tilton 74-Series and 75-Series Master Cylinders, as a direct-mount onto the master or part of a remote-mount reservoir system.

76-Series master cylinders retain the rear port to continue to match the function of the old version, while the added extra-deep top port enables the use of a banjo fitting.

• Addition of a top AN-3 outlet port (along with the original rear outlet port) allows for more flexibility with plumbing.

The rear spherical bearing mount and one-piece piston/pushrod eliminate side thrust into the master cylinder bore, providing consistent and repeatable braking.

The 78-Series master cylinder rebuild kit includes all 78-Series master cylinder internals for 1" Bore Size

The rear spherical bearing mount and one-piece piston/pushrod eliminate side thrust into the master cylinder bore, providing consistent and repeatable braking.

78-Series Master Cylinder Features

The rear spherical bearing mount and one-piece piston/pushrod eliminate side thrust into the master cylinder bore, providing consistent and repeatable braking.

The rear spherical bearing mount and one-piece piston/pushrod eliminate side thrust into the master cylinder bore, providing consistent and repeatable braking.

The rear spherical bearing mount and one-piece piston/pushrod eliminate side thrust into the master cylinder bore, providing consistent and repeatable braking.

The rear spherical bearing mount and one-piece piston/pushrod eliminate side thrust into the master cylinder bore, providing consistent and repeatable braking.

The rear spherical bearing mount and one-piece piston/pushrod eliminate side thrust into the master cylinder bore, providing consistent and repeatable braking.