Aeromotive : 14134

Aeromotive 14201 Fuel Log, 4150/4500 Series Old Holley 7/8" x 20

Aeromotive 15106 In-Line Full Flow Check Valve (Male -6 AN inlet, Female -6 AN outlet)

Aeromotive : 15117

Aeromotive 15118 3/8’’ Female to ORB-08 Feed Line Adapter

Aeromotive 15606 AN-06 O-ring Boss / AN-06 Male Flare Adapter Fitting

Aeromotive 15607 AN-08 O-ring Boss / AN-08 Male Flare Adapter Fitting

Aeromotive 15608 AN-10 O-ring Boss / AN-10 Male Flare Adapter Fitting

Aeromotive 15610 AN-10 O-ring Boss / AN-08 Male Flare Reducer Fitting

Aeromotive 15612 AN-12 O-ring Boss / AN-12 Male Flare Adapter Fitting

Aeromotive 15618 AN-08 O-ring Boss - Slim Line - Port Plug

Aeromotive 15632 0 to 15 psi Fuel Pressure Gauge

Aeromotive 15633 0 to 100 psi Fuel Pressure Gauge

Aeromotive 15642 AN-10 cutoff to AN-12 Flare Union

AN O-Ring Adapter Fitting
-Fitting Style : Adapter
-Fitting Category : AN to Straight Cut
-Adapter Angle : Straight
-Adapter Material : Aluminum
-Adapter Finish : Black Anodized
-Swivel : No
-Gauge Port : No
-O-Rings Included : No
-Fitting Attachment 1 : Male AN
-Fitting Size 1 : -8 AN
-Fitting Attachment 2 : Male Straight Cut O-Ring
-Fitting Size 2 : -6 AN
-Quantity : Sold Individually

Aeromotive 15671 Y-Block, AN-06 - 2x AN-04

Aeromotive 15672 Y-Block, AN-06 - 2x AN-06

Aeromotive 15694 Fitting, Union, AN-06, 1/8-NPT Port

ALL-26040

ALL-26042 Carburetor hats are ideal to cover open carbs and prevent debris from falling into the engine

ALL-26043 Carburetor hats are ideal to cover open carbs and prevent debris from falling into the engine

ALL-26044 Carburetor hats are ideal to cover open carbs and prevent debris from falling into the engine

ALL-26047 Seal air cleaner and eliminate using a wrench to remove air cleaner assembly. Available in 1/4" and 5/16" thread.

ALL-26051 Hold Down Seal prevents dirt collected in the "cup" of the air cleaner lid, which can fall into the carburetor causing major engine damage

Air Cleaner Stud/Nut, Steel, Cadmium Plated, 5/16 in.-18 Male Thread to 1/4 in.-20 Female Thread Adapter

Air Cleaner Stud, Steel, Offset, Cadmium Plated, 1/4 in.-20 Thread, 6 in. Length

ALL-26085 Air Cleaner Spacer and O-Ring .500 Inch for 5-1/8 air cleaner neck.

ALL-26086 Replacement Parts For Aluminum Air Cleaners

ALL-26087 Replacement Parts For Aluminum Air Cleaners

ALL-54168