Order Status/Your Account
Call us at
Ricky Stenhouse Jr.
Darrell Wallace Jr.
Fifth Third Bank
Roush Performance Products
Roush Fenway Apparel
Flags and Banners
Air and Fuel
AN Fittings and Hoses
Ignition & Electrical
Oiling System Components
Monday - Friday
7:30am - 5:30pm
9:00am - 1:00pm
All Times U.S. Eastern
Trick Flow® 51400004 Twisted Wedge Street Heads 170cc, Assembled
Usually Ships in 1 to 2 Business Days
Trick Flow's patented Twisted Wedge Street series performance aluminum cylinder heads feature Trick Flow's revolutionary "twisted wedge" combustion chambers to build more mid-range and top-end power without sacrificing bottom-end torque.
Here's how it works: Trick Flow engineers rotated the valves and moved them over the center of the cylinder bores. This optimizes the valve angles and the combustion chamber shape to dramatically boost airflow and allow for more complete combustion of the air/fuel charge. And unlike other brands, Trick Flow Twisted Wedge heads are the only aftermarket heads that can run 2.020"/1.600" valves with stock, unmodified pistons and performance camshafts up to .550" lift.
The Twisted Wedge Street series heads are built for heavy-duty use, too. They have .560" thick combustion chamber walls and fire decks for added strength without a loss of cooling capacity, plus additional support risers in the water jackets for increased head gasket integrity.
The Twisted Wedge Street heads are designed as a performance replacement for stock Ford heads and are 50-state emissions-legal on 1996 and earlier 289,302,and 351W Fords (CARB E.O. number D-369-1). The Twisted Wedge Street CNC heads combine the proven power-building features of the Street heads with five-axis CNC-porting to give small block Fords an even bigger performance boost.
All Twisted Wedge Street series heads work with most OEM and aftermarket intake and exhaust manifolds/headers. The heads come fully assembled and ready-to-install right out of the box with stainless steel valves (intakes are backcut for improved flow), valve springs, locks, retainers, ARP rocker studs, and guideplates. Bare cylinder head castings are also available.
What is a Twisted Wedge Head?
Compare a stock combustion chamber (left) with the patented Twisted Wedge
combustion chambers found in Trick Flow Twisted Wedge cylinder heads (right). The valve angles are rotated to unshroud the valves, and the spark plug has been moved closer to the center of the cylinder. This increases airflow and allows more complete combustion.
Twisted Wedge 170 and Twisted Wedge Track Heat 170 Cylinder Heads for Small Block Ford
Intake Flow CFM
Exhaust Flow CFM
Tests conducted at 28" of water (pressure).
Bore size: 4.030"; exhaust with 13⁄4" pipe.
Combustion Chamber Volume: 61cc
Intake Runner Volume: 170cc
Exhaust Runner Volume: 66cc
Intake Port Location: Standard
Exhaust Port Shape: Square
Exhaust Port Location: Standard
Intake Valve Diameter (in): 2.020 in.
Exhaust Valve Diameter (in): 1.600 in.
Valve Springs Included: Yes
Maximum Valve Lift (in): 0.600 in.
Outside Diameter of Outer Spring (in): 1.460 in.
Proform 66881 Chevy Hardened Guide Plates. 5/16" S/B, Raised. 8 Pieces Per Pack.
Comp Cams 978-16 Double Valve Spring 403 Spring Rate Set of 16
Howards 90074 Billet Aluminum Rocker Arms, Chevy 1.5/1.6 Ratio
Jesel KSS-576060 Rocker Arm Assembly, Yates D3 1.60 Ratio
Comp Cams 730-16 Titanium Retainers, Super Lock 10° 1.437 - 1.500
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Doing Business with SRI Performance
Terms & Conditions
Questions? Call Us!
Mon-Fri 7am-6pm EST
Saturday 9am-1pm EST
(Your shopping cart is empty)